Interactions of the vector breathers for the coupled Hirota system with $$4\times 4$$ 4 × 4 Lax pair

Nonlinear Dynamics - In this paper, we investigate the interactions of the vector breathers for the coupled Hirota system with $$4\times 4$$ Lax pair. Firstly, we give the first-order breather...     

Flow-induced shear stress and deformation of a core–shell-structured microcapsule in a microchannel

A numerical model was developed and validated to investigate the fluid–structure interactions between fully developed pipe flow and core–shell-structured microcapsule in a microchannel. Different flow rates and microcapsule shell thicknesses were considered. A sixth-order rotational symmetric distribution of von Mises stress over the microcapsule shell can be observed on the microcapsule with a thinner shell configuration, especially at higher flow rate conditions. It is also observed that when being carried along in a fully developed pipe flow, the microcapsule with a thinner shell tends to accumulate stress at a higher rate compared to that with a thicker shell. In general, for the same microcapsule configuration, higher flow velocity would induce a higher stress level over the microcapsule shell. The deformation gradient was used to capture the microcapsule's deformation in the present study. The effect of Young's modulus on the microcapsule shell on the microcapsule deformation was investigated as well. Our findings will shed light on the understanding of the stability of core–shell-structured microcapsule when subjected to flow-induced shear stress in a microfluidic system, enabling a more exquisite control over the breakup dynamics of drug-loaded microcapsule for biomedical applications.     

非富勒烯受体DA'D型稠环单元的结构修饰及电池性能研究

近年来,设计和合成高性能非富勒烯受体(NFAs)材料已经成为太阳能电池研究领域的前沿课题。基于DA'D型稠环结构的NFAs由于具有吸光系数高、能级和带隙可调、结构易于修饰、分子可高效合成、光电学性能优异等优点而受到了越来越广泛的关注。在短短7年的时间里,能量转换效率(PCE)从3%~4%提高到18%。2019年初邹应萍等报道了一个优秀的受体分子Y6,与PM6共混制备单结电池,获得了15.7%的能量转换效率。Y6类受体材料的中心给电子单元为DA'D型稠环结构,缺电子单元(A')通过氮原子与两个给电子单元(D)并联形成稠环结构,这有助于降低前线分子轨道能级并增强吸收,同时与氮相连的两个烷基链和位于噻吩并噻吩β位的两个侧链则有助于提高溶解度及调节结晶性。自Y6问世以来,人们对分子的结构剪裁进行了深入的研究,并报道了数十种新的结构。在这些新的受体中,DA'D部分的结构裁剪对提高器件效率和太阳能电池的性能起着至关重要的作用。本文对A'、D单元和侧链结构修饰的研究进展进行了综述。通过选择几组受体,对最近报道的分子进行分类,并将它们的光学、电化学、电学和光电性质与精确的结构修饰相关联,从而对结构-性能关系进行全面概述。     

Injectable Micromotor@Hydrogel System for Antibacterial Therapy

The drug delivery system based on nano/micromotors has become a research hot spot in recent years. However, naked micromotors may be ruptured or passivated under the complex biological environment, which will result in the leakage of drugs in advance or limited self-propulsion performance. Herein, an injectable micromotor@hydrogel drug delivery system to protect micromotors from the external environment is proposed. The micromotors were prepared through layer-by-layer assembly technology. The asymmetric decomposition of hydrogen peroxide catalyzed by the locally distributed platinum nanoparticles enabled efficient propulsion of the micromotors in low concentration of hydrogen peroxide. In order to protect micromotors, they were loaded into the Schiff base hydrogel. The micromotor@hydrogel system can be injected directly into the lesion to release micromotors in response to the environment, reducing external influence on micromotors and improving the sustained-release effect. Erythromycin (Ery) loaded into the micromotors and the micromotor@hydrogel system demonstrated excellent antibacterial effect. Micromotors released from the hydrogel underwent enhanced diffusion in the surroundings of bacteria without addition of exogenous hydrogen peroxide, which was manifested by their appearance in edge of the inhibition zone. The proposed micromotor@hydrogel drug delivery system offers a new strategy for the treatment of bacterial infections.     

Photocatalytic degradation of methyl orange by Ca doped β-In2S3 with varying Ca concentration

Research on Chemical Intermediates - Industrial wastewater is becoming a universal environmental problem, wherein toxic organic compounds are important sources of pollution. For the degradation...     

Direct Synthesis of Adipic Esters and Adiponitrile via Photoassisted Cobalt-Catalyzed Alkene Hydrodimerization

The direct hydrodimerization of acrylates and acrylonitrile offers a general streamlined access to industrially important intermediates to nylon 6,6. However, a practical catalytic method for this process has thus far underdeveloped owing to the challenges in regioselectivity and environmental compatibility of applied reagents. Here, we report a cobalt-catalyzed tail-to-tail hydrodimerization of activated alkenes driven by a visible-light photoredox catalysis at ambient temperature, which is applicable to both adipates and adiponitrile synthesis from potentially renewable feedstocks. This protocol utilizes half equivalent of hantzsch ester as a recyclable two-electron and two-proton donor with the assistance of catalytic amount of base as a proton shuttle, and has been shown to be highly regioselective and efficient for hydrodimerizing various activated alkenes to 1,4-difunctionalized butane derivatives.     

光纤基底TiNi形状记忆合金薄膜制备工艺

将TiNi基记忆合金薄膜与光纤相结合可制成智能化、集成化且成本经济的微机电系统和微传感器件.本文采用磁控溅射法在二氧化硅光纤基底上制备TiNi记忆合金薄膜,系统讨论了溅射工艺参数以及后续退火处理对薄膜质量的影响.采用自研制光纤镀膜掩膜装置在直径为125μm的光纤圆周表面上形成均匀薄膜.实验表明:在靶基距、背底真空度、Ar气流量和溅射时间一定的条件下,溅射功率存在最佳值;溅射压强较大时,薄膜沉积速率较低,但薄膜表面粗糙度较小.进行退火处理后,薄膜形成较良好的晶体结构,Ti_49.09Ni_50.91薄膜中马氏体B19′相和奥氏体B2相共存,但以B19′为主.根据本文研究结果,在玻璃光纤基底上制备高质量的TiNi基记忆合金薄膜是可实现的,本工作为下一步研制微机电系统和微型传感器做了基础准备.     

Microstructure evolution and passivation quality of hydrogenated amorphous silicon oxide(a-SiOx:H) on〈100〉- and 〈111〉-orientated c-Si wafers

Hydrogenated amorphous silicon oxide(a-SiOx:H) is an attractive passivation material to suppress epitaxial growth and reduce the parasitic absorption loss in silicon heterojunction(SHJ) solar cells. In this paper, a-SiOx:H layers on different orientated c-Si substrates are fabricated. An optimal effective lifetime(τ(eff)) of 4743 μs and corresponding implied opencircuit voltage(iV(oc)) of 724 mV are obtained on〈100〉-orientated c-Si wafers. While τ(eff) of 2429 μs and iV_oc of 699 mV are achieved on 111-orientated substrate. The FTIR and XPS results indicate that the a-SiOx:H network consists of SiOx(Si-rich), Si–OH, Si–O–SiHx, SiO2 ≡ Si–Si, and O3 ≡ Si–Si. A passivation evolution mechanism is proposed to explain the different passivation results on different c-Si wafers. By modulating the a-SiOx:H layer, the planar silicon heterojunction solar cell can achieve an efficiency of 18.15%.